• P5510 Pneumatic Pressure Comparator

  • Đăng ngày 10-07-2017 05:01:28 AM - 1129 Lượt xem
  • Giá bán: Liên hệ

  • A pressure comparator supplies the same precisely controlled pressure to both a reference gauge and device under test for calibration. The P5510 is uniquely suited for your low pressure pneumatic calibration workload.

    • Dual pressure/vacuum capability
    • Bench mount design
    • Built-in handpump as pressure/vacuum source
    • High quality needle valve for fine control
    • Test port adapters that require no PTFE tape or wrenches
    • Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution

    Make it a pressure calibrator (P5510-2700G)
    The Fluke Calibration P5510 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5510 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.

    For example, the P5510-2700G-3 is a P5510 Pressure Comparator, bundled together with 2700G-BG2M, 2700G-BG700K, 2700G-BG100K. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –15 psi to 300 psi (–100 kPa to 2 MPa).

    The accuracy of the calibrator is equal to the accuracy of the 2700G Reference Pressure Gauge being used: ±0.02% full scale of positive pressure or ±0.05% of full scale for vacuum.

Số lượng

Pressure range 0 to 300 psi (20 bar); vacuum range 0 to 24 inHg (800 mbar)

This pneumatic pressure comparator is designed for testing pressure measuring instruments against master test instruments. This cost effective instrument provides precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers.


Pressure Range 0 to 300 psi (20 bar)
Vacuum Range 0 to 27 inHg (915 mbar 90% vacuum)
Instrument Size (W x D x H) 9.5 x 13 x 7 in (240 x 330 x 180 mm)
Instrument Weight 7.5 lb (3.5kg)
Test Port Adapters 2 sets 1/8, 1/4, 3/8, and 1/2 NPT or BSP


Danh mục sản phẩm

Thống kê
  • Đang truy cập24
  • Hôm nay1,610
  • Tháng hiện tại62,594
  • Tổng lượt truy cập3,060,002
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây