• 700HPPK Pneumatic Test Pump Kit

  • Đăng ngày 10-07-2017 03:58:17 PM - 149 Lượt xem
  • Giá bán: Liên hệ

  • Generate 21 MPa (3000 psi) easily in the field, without liquid contamination or the hazard of a pressurized gas cylinder

    The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs) that include transmitters, controllers, pilots, digital and analog gauges, and more. It’s the perfect solution for generating high pressure in the field, where conditions and operating surfaces can vary.

    The 700HPPK is the ideal choice for calibration technicians, test engineers, and instrument technicians working in industries like natural gas transmission and distribution, process, aerospace and defense, who need a simple-to-use, safe and portable pressure source that they can depend on in a wide variety of conditions.

    The 700HPPK contains both a calibration manifold and high pressure pump to generate and finely adjust pressures . A second model, the 700HPP, is available for people who only prefer a high pressure source.

    Use the 700HPPK Test Pump Kits with 2700G Reference Pressure Gauges » or 700G Precision Pressure Gauges » for a complete pressure calibration solution.

    Features at a glance

    • Generate and adjust pneumatic pressures up to 21 MPa (3000 psi)
    • Rugged, portable and stable enough to go anywhere -- on any surface
    • Reaches pressure in 20 seconds to full scale into a 30 cm3 volume
    • Detachable pressure adjustment system for adjusting pressure, connecting reference and test devices on bench and in the field, and isolating and venting pressure
    • Easily switch out reference gauges without requiring PTFE tape or tools
    • 2-meter (6.5-foot) pressure line and assorted pressure fittings enable a wide variety of possible connections
    • In-line filter and desiccant systems protect device from contamination from the DUT


Số lượng

Use the 700HPPK just about anywhere

The 700HPPK is designed to be at home in the lab or the field. Lightweight and portable, it features collapsible feet, built-in handhold, and a canvas carrying case, making it easy to carry to the field.

The 700HPPK works on just about any surface, so you don’t need a flat laboratory bench or flat area in the field.

With the 700HPPK, you don’t need to carry a lot of extra equipment or accessories. No PTFE tape or extra tools are required thanks to a swivel ¼ NPT female reference gauge connector that makes switching reference gauges fast and easy.

The pump kit is designed so that the calibration manifold attaches and detaches easily via quick detent pins. You won’t need to spend a lot of time setting it up or packing it away at the end of the day.

Generate high pressure accurately and safely for a wide workload

The 700HPPK generates pressure up to 21 MPA (3000 psi) within 20 seconds to full scale into a 10 cm3volume. A detachable pressure adjustment system and adjustment control knob enables users to make fine pressure adjustments to 0.1% of reading or better. The 700HPPK includes a 2 meter (6.5-foot ) pressure line and assorted pressure fittings, enabling you to connect a wide variety of DUTs for wide workload coverage. In fact, the 700HPPK covers at least five times more workload than standard range pneumatic pumps. An in-line filter system protects the system against contamination from the unit under test.

 

700HPP

700HPPK

Maximum working pressure

21 MPa
3000 psi

Time to generate full scale pressure with 10 cc volume (s)

 

20

Weight

5.5 kg (12.2 lbs.)

7.2 kg (15.8 lbs.)

Reference gauge connection

¼ NPT, quick connect

Inlet supply contamination protection

Desiccant filter

DUT contamination protection filter

None

100 micron

Fine adjustment resolution

n/a

0.05% rdg

Maximum leak rate (with isolation valve closed)

n/a

0.01% rdg

Dimensions

66 cm x 25 cm x 13 cm (26 in x 10 in x 5 in)

66 cm x 30.5 cm x 13 cm (26 in x 12 in x 5 in)

Supplied test port adapters

 

NPT: 1/8, ¼ NPT
BSP: 1/8, ¼ BSP
MET: M14, M20, ¼ NPT

 

Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập38
  • Hôm nay1,313
  • Tháng hiện tại56,962
  • Tổng lượt truy cập2,284,371
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây