• Thiết bị kiểm tra điện Fluke 1000FLT

  • Đăng ngày 29-07-2016 05:15:50 AM - 1604 Lượt xem
  • Giá bán: Liên hệ

  • Save time and reduce costs by using the only tester that performs all essential lighting tests in less than 30 seconds.

    • Lamp test: Test bulb without removing from fixture
    • Ballast test: Easily determine if ballast is working
    • Non-contact voltage: Quickly check for voltage presence
    • Pin continuity test: Tests if filaments have continuity
    • Ballast-type test: Determine if ballast is electronic or magnetic without taking fixture apart – identify energy wasting ballasts


Số lượng

Key benefits of the Fluke 1000FLT fluorescent light tester

  • Saves time and reduces costs: Perform 5 essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done
  • Survives on-the-job handling: Drop-tested to survive from a six foot (two meter) ladder
  • Easy to use: Bright indicator light plus audible alert
  • Built to last, easy to maintain: The Fluke 1000FLT's extendable test rod is all metal and very rugged. But should the need arise, this test rod is easily replaced
  • Long life: Backed with a three-year warranty
General Specifications
Lamp test max output 3000 V peak
Ballast test 20 kHz
Ballast type descriminator ≤3m (10 feet) distance
Pin continuity test < 1 kΩ
NCV (VoltAlert™)

85 to 277 V ac
45 to 67 Hz
≤10 cm (4 in) distance

Environmental Specifications
Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Relative humidity 85% maximum
Safety Specifications
Safety rating IEC 61010-1, pollution degree 2
Mechanical and General Specifications
Size 21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in)
Weight 0.37 kg (0.80 lb.)
Battery type 4 x AA alkaline IEC LR6
Battery life 40 hours
Auto power off 20 minutes after non-use
Low battery indicator Power button light blinks when power is low (typically 85% of capacity depleted)
Operating altitude <2000 m
Electromagnetic environment EN 61326-1: Portable
Electromagnetic compatibility CE CISPR 11: Group 2, Class A
Group 2 contains all ISM RF equipment in which radio-frequency energy in the frequency range 9 kHz to 400 GHz is intentionally generated and used or only used, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purposes
Class A equipment is suitable for use in non-domestic locations and/or directly connected to a low-voltage power supply network
US FCC Part 15 Subpart B – exempt as test equipment per clause 15.103
Korea only Class A Equipment (Industrial Broadcasting & Communication Equipment) 1
1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
Resistance to impact 2 meter drop
Warranty 3 years

 

Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập73
  • Hôm nay839
  • Tháng hiện tại35,151
  • Tổng lượt truy cập2,512,325
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây